• RSS Feed
• Login My Stylepark
• Newsletter
• Data protection
• Imprint

• deutsch
• english

01 Material Profile

material description

The product Riffel Anthracite vertical is a genuine metal High Pressure Laminate (HPL) of anthracite colour with a vertically embossed chequered structure.

During pressing operation, the aluminium foil is pressed on a core of phenolic resin impregnated kraft paper.

The HPL is meant for vertical use in interior decoration and can easily be cleaned with non-abrasive detergents (no acetone, not alkaline).

Generally, reference # 469/930 is produced and delivered in flame-retardant quality according to IMO (see technical information in short).

02 Technical Data

technical description

General Information
Riffel Anthracite vertical is available in thickness 0.9 mm in the sizes 2440 x 1220 mm and 3050 x 1220 mm.

For protection during transport and processing, the HPL are covered by a protective foil. Temperature during processing must not exceed 80°C.

Flame-retardant quality
The HPL are flame-retardant as to the FTP-code annex 1 part 5 no. 2.1 and part 6 no. 2.1 and comply with the FTP-code part 2 for smoke density and toxicity criteria. These products bear the “steering-wheel logo” as well as the USCG Approval no. 164.112/EC0736/118.083.

Processing
Like all standard HPL, Riffel Anthracite vertical can be sawn, drilled and milled with carbide-tipped cutting tools. Pressing of the laminates should be effected at a maximum temperature of 60°C and a maximum pressure of 0.3 N/mm². Gluing is done with conventional glues and adhesives, e.g. white glue, two-component epoxy adhesive or neoprene contact adhesive. Exception: Urea adhesives are not suitable.

Upon request Riffel Anthracite vertical is also available in postforming quality.

03 Material Properties

04 Dimensions (available Sizes)

05 Weight