| form | |
|---|---|
form |
board, plain (closed) |
Homapal
Ash ST. ETIENNE matt
material
›
compound material
›
with wood
Homapal
|
 |
Article no: H20/011
stylepark-id: 57.6418.00046
Application: |
Wall, Furniture / interior design, Exhibition (stand) construction |
categories: |
material
›
compound material
›
with wood
|
01 Material Profile
material description
ASH ST. ETIENNE is a High Pressure Laminate (HPL) with a surface of reconstituted veneer. By means of a special melamine coating the surface gets the visual appearance and the touch of slightly washed out wood.
The timber used for production comes from sustainable forestry. Owing to the production process the body structure of the veneers differ only slightly from sheet to sheet. However, ASH ST. ETIENNE still is a natural product with all the characteristics that are typical for timber products. During pressing, the veneer is pressed on a core of phenolic resin impregnated paper.
The HPL is destined for vertical use in interior decoration and can be easily cleaned with a lint-free soft cloth and a mild detergent that must not contain abrasive contents. Please do not use solvent-containing cleaners.
Upon request, reference # H20/011 will be produced and delivered in flame-retardant quality according to IMO (see our technical information in short).
02 Technical Data
technical description
General Information
ASH ST. ETIENNE is available in thickness 1.0 mm in size 3050 x 1220 mm.
For protection during transport and processing, the HPL are covered by a protective foil. Temperature during processing must not exceed 80°C.
Flame-retardant quality
The HPL are flame-retardant as to the FTP-code annex 1 part 5 no. 2.1 and part 6 no. 2.1 and comply with the FTP-code part 2 for smoke density and toxicity criteria. These products bear the “steering-wheel logo” as well as the USCG Approval no. 164.112/EC0736/118.083.
Processing
Like all standard HPL, ASH ST. ETIENNE can be sawn, drilled and milled with carbide-tipped cutting tools. Pressing of the laminates should be effected at a maximum temperature of 60°C and a maximum pressure of 0.1 N/mm². Gluing is done with conventional glues and adhesives, e.g. white glue, two-component epoxy adhesive or neoprene contact adhesive. Exception: Urea adhesives are not suitable.
03 Material Properties
| optics/haptics | |
|---|---|
appearance |
opaque, matte |
colour |
brown, yellow |
haptics |
textured |
light transmission |
no transmission |
| properties | |
|---|---|
classification by standart |
IMO, Lloyds Register, US Coast Guard |
| finish/treatment | |
|---|---|
coated with… |
plastic |
| material type | |
|---|---|
wood |
Ash |
04 Dimensions (available Sizes)
| Dimensions (available Sizes) | |
|---|---|
Width |
1220 mm |
Height (thickness) |
1 mm |
Length |
3050 mm |
05 Weight
| Weight | |
|---|---|
Weight per m² |
1200 g/m² |
06 Tags
Homapal Articles, Homapal Products07 Articles about Homapal
Poplar, Koto and Ayous veneers
Homapal offers a wide range of laminated wood panels with high-quality deck laminates.
› To the article08 Glossary
wood, high pressure laminates, HOMAPAL Plattenwerk
