• RSS Feed
• Login My Stylepark
• Newsletter
• Data protection
• Imprint

• deutsch
• english

01 Material Profile

material description

The product Stainless Steel WHEELS is a High Pressure Laminate (HPL) with a genuine metal surface in natural colour with a grinding pattern showing circles that lie one upon the other. The surface is a genuine stainless steel foil.

During pressing operation, the stainless steel foil is applied on a core of phenolic resin impregnated kraft paper. Please pay particular attention to the handmade design of the copper surface.

The HPL is meant for vertical use in interior decoration and can easily be cleaned with non-abrasive detergents (no acetone, not alkaline).

Generally, reference # 600/600 is produced and delivered in flame-retardant quality according to IMO (see technical information in short).

02 Technical Data

technical description

General Information
Stainless Steel WHEELS is available in thickness 1.0 mm in size 2440 x 1020 mm.

For protection during transport and processing, the HPL are covered by a protective foil. Temperature during processing must not exceed 80°C.

Flame-retardant quality
The HPL are flame-retardant as to the FTP-code annex 1 part 5 no. 2.1 and part 6 no. 2.1 and comply with the FTP-code part 2 for smoke density and toxicity criteria. These products bear the “steering-wheel logo” as well as the USCG Approval no. 164.112/EC0736/118.083.

Processing
In order to process stainless steel laminates special tools and settings are necessary. Detailed information can be downloaded as a PDF file under www. homapal.de. Pressing of the laminates should be effected at a maximum temperature of 60°C and a maximum pressure of 0.3 N/mm². Gluing is done with conventional glues and adhesives, e.g. white glue, two-component epoxy adhesive or neoprene contact adhesive. Exception: Urea adhesives are not suitable.

03 Material Properties

04 Dimensions (available Sizes)

05 Weight