The products by Gira allow all the technical components in a building to be comfortably networked.
|Categories:||Electrical installations › Switches / Sockets › Switches › Sensor switches|
|Electrical installations › Building control systems › Light control systems|
|Electrical installations › Building control systems › Blinds / Shutter control systems|
|Electrical installations › Building control systems › Information displays|
A wide range of connected bus functions can be controlled with the Gira push button sensor 3, such as externally saving and calling up of light scenes, switching and dimming lights and raising and lowering blinds. If requirements change, the push button assignment can be simply reprogrammed. The number of functions saved to a push button sensor depends on the number of its buttons. Each button can be inscribed to achieve clear assignment of what is controlled. The inscription space is discreetly backlit. This enables the push button sensor to be easily located in the dark and ensures that inscriptions are easily read at all times. Each button has two LEDs for status display and can be operated on the left, right and centrally, depending on the setting/variant. This results in lower costs: independent of device variant, the Gira push button sensor 3 only needs a single bus coupler. The Gira push button sensor 3 Basic offers basic functions and the Comfort and Plus variants offer additional functions.
|Frame shape||square with rounded corners|
|Form of protection (DIN 40050)||IP20 protection against: solids > 12 mm|
|Colors||shades of beige|
Please fill in the form to request a printed catalogue.
Please fill in the form to request a PDF catalogue.
Please fill in the form.