• RSS Feed
• Login My Stylepark
• Newsletter
• Data protection
• Imprint

• deutsch
• english

01 Material Profile

material description

The product Copper CRUSH STIPPLE is a High Pressure Laminate (HPL) with a genuine copper surface. Surface of the sheets is manually provided with an intensive grinding pattern. Thus, depending on the light, fascinating colour reflectances are created. Due to the manual labour every sheet is unique, nevertheless, several sheets can be combined harmoniously.

During pressing operation, the copper foil is applied on a core of phenolic resin impregnated kraft paper. Please pay particular attention to the handmade design of the copper surface.

The HPL is meant for vertical use in interior decoration and can easily be cleaned with non-abrasive detergents (no acetone, not alkaline).

Generally, reference # 401/229 is produced and delivered in flame-retardant quality according to IMO (see technical information in short).

02 Technical Data

technical description

General Information
Copper CRUSH STIPPLE is available in thickness 1.3 mm in the sizes 2440 x 1220 mm and 3050 x 1220 mm.

For protection during transport and processing, the HPL are covered by a protective foil. Temperature during processing must not exceed 80°C.

Flame-retardant quality The HPL are flame-retardant as to the FTP-code annex 1 part 5 no. 2.1 and part 6 no. 2.1 and comply with the FTP-code part 2 for smoke density and toxicity criteria. These products bear the “steering-wheel logo” as well as the USCG Approval no. 164.112/EC0736/118.083.

Processing
Like all standard HPL, Copper CRUSH STIPPLE can be sawn, drilled and milled with carbide-tipped cutting tools. Pressing of the laminates should be effected at a maximum temperature of 60°C and a maximum pressure of 0.3 N/mm². Gluing is done with conventional glues and adhesives, e.g. white glue, two-component epoxy adhesive or neoprene contact adhesive. Exception: Urea adhesives are not suitable.

03 Material Properties

04 Dimensions (available Sizes)

05 Weight